If you want to remove the old flooring in your home, you may want to contact Floor Busters of Central Florida to remove it. The process can be time-consuming and expensive. Professionals may charge $1.22 to $2.38 per square foot of flooring, but you may save money by doing it yourself. All you need to get started is the right tools. If you don’t own these tools, you can check out a tool library or rent them from a local home improvement store.
To remove the subfloor and flooring together, start by drilling a hole 1/8 inch deeper than the thickness of the flooring. Then, cut the flooring into three to four-foot-long sections. Use a reciprocating saw to cut the floor flush with the walls and avoid floor joists. Once you have made a hole, the next step is to cut out the subfloor. Make sure to carefully scrape the flooring, as well as the subfloor.
If the subfloor is made of wood, you need to remove it. To do this, use a circular saw to cut the planks into smaller sections. Use a pry bar or mallet to pull out the sections of wood. If the subfloor has staples, you can use a large magnet to pick up all of them. After the section of wood has been removed, use a pry bar or a large mallet to separate the planks from each other.
Using a professional floor removal service is a better way to get your flooring back on track. Traditional floor removal methods produce a lot of dust. Dust from the removal process will be present on every surface of your home. If you suffer from allergies or respiratory problems, this dust is not healthy. The dust will linger in the air for days or even months after the job is complete. Getting rid of this dust will reduce the risk of infection from bacteria and fungi.
Before you begin the process of removing the old floor, you should make sure that you turn off the water supply to your home. If you’re removing the toilet, make sure to drain the tank and remove any bolts attached to the toilet. You may also want to break up a tile or two with a hammer or chisel. Regardless of the type of tile, make sure you have everything you need to remove the old floor.
Once you have removed the old flooring, you should prepare the area for the asbestos removal process. If the asbestos is still in place, you’ll need to clean up the floor. For this reason, you’ll want to hire a professional to do the job. Before the process starts, you should wear protective clothing and gloves. The process is more difficult if the floor is damaged, but once you get the job done, you can take it on yourself.
The process of removing the old flooring is time-consuming, but the end result is worth the effort. Professionals use industrial jackhammers to scrape away the old flooring. A vacuum is then attached to the point of contact, eliminating dust and health hazards caused by the particles. Every square foot of tile produces a pound of dust. You should make sure to avoid exposing yourself to these dust particles, as they are very dangerous for your health.
Before you begin removing your old flooring, you must first determine whether you can do it yourself. Depending on your skill level, it may not be possible to find a professional. However, if you do your research, you’ll find that it’s easier than you think! You’ll be surprised by the many DIY tips that can save you money. When you’re ready to remove your old flooring, you’ll know that the process won’t be any more difficult.
You can choose to remove your flooring with the help of a professional, or you can hire a floor scraper yourself. A floor scraper is an excellent tool to use to remove vinyl floors. It can also remove vinyl subfloors if they’re glued down. A 5-in-1 tool can help remove the vinyl flooring, and it chips away the old adhesive. There are even some places where you can recycle the old flooring if you want to recycle it.