Home » Articles posted by Johnny Gilstrap

Author Archives: Johnny Gilstrap

Floor Removal – How to Do it Yourself

If you want to remove the old flooring in your home, you may want to contact Floor Busters of Central Florida to remove it. The process can be time-consuming and expensive. Professionals may charge $1.22 to $2.38 per square foot of flooring, but you may save money by doing it yourself. All you need to get started is the right tools. If you don’t own these tools, you can check out a tool library or rent them from a local home improvement store.

floor removal

To remove the subfloor and flooring together, start by drilling a hole 1/8 inch deeper than the thickness of the flooring. Then, cut the flooring into three to four-foot-long sections. Use a reciprocating saw to cut the floor flush with the walls and avoid floor joists. Once you have made a hole, the next step is to cut out the subfloor. Make sure to carefully scrape the flooring, as well as the subfloor.

If the subfloor is made of wood, you need to remove it. To do this, use a circular saw to cut the planks into smaller sections. Use a pry bar or mallet to pull out the sections of wood. If the subfloor has staples, you can use a large magnet to pick up all of them. After the section of wood has been removed, use a pry bar or a large mallet to separate the planks from each other.

Using a professional floor removal service is a better way to get your flooring back on track. Traditional floor removal methods produce a lot of dust. Dust from the removal process will be present on every surface of your home. If you suffer from allergies or respiratory problems, this dust is not healthy. The dust will linger in the air for days or even months after the job is complete. Getting rid of this dust will reduce the risk of infection from bacteria and fungi.

Before you begin the process of removing the old floor, you should make sure that you turn off the water supply to your home. If you’re removing the toilet, make sure to drain the tank and remove any bolts attached to the toilet. You may also want to break up a tile or two with a hammer or chisel. Regardless of the type of tile, make sure you have everything you need to remove the old floor.

Once you have removed the old flooring, you should prepare the area for the asbestos removal process. If the asbestos is still in place, you’ll need to clean up the floor. For this reason, you’ll want to hire a professional to do the job. Before the process starts, you should wear protective clothing and gloves. The process is more difficult if the floor is damaged, but once you get the job done, you can take it on yourself.

The process of removing the old flooring is time-consuming, but the end result is worth the effort. Professionals use industrial jackhammers to scrape away the old flooring. A vacuum is then attached to the point of contact, eliminating dust and health hazards caused by the particles. Every square foot of tile produces a pound of dust. You should make sure to avoid exposing yourself to these dust particles, as they are very dangerous for your health.

Before you begin removing your old flooring, you must first determine whether you can do it yourself. Depending on your skill level, it may not be possible to find a professional. However, if you do your research, you’ll find that it’s easier than you think! You’ll be surprised by the many DIY tips that can save you money. When you’re ready to remove your old flooring, you’ll know that the process won’t be any more difficult.

You can choose to remove your flooring with the help of a professional, or you can hire a floor scraper yourself. A floor scraper is an excellent tool to use to remove vinyl floors. It can also remove vinyl subfloors if they’re glued down. A 5-in-1 tool can help remove the vinyl flooring, and it chips away the old adhesive. There are even some places where you can recycle the old flooring if you want to recycle it.

How to Find the Best Junk Removal Services

If you are looking for Junk Removal York PA services, you may be wondering how to find the best ones. Here are some of the factors to consider when choosing a junk removal company. Having the junk removed from your property professionally will save you a lot of hassle and money. First, ensure that the junk removal company you hire is reliable and experienced. This will ensure that no surfaces are damaged during the process. A reliable junk removal service will also make sure that no damaged surfaces are left behind.

junk removal services

When hiring a junk removal service, you should make sure that you have a list of what you are willing to discard. Most junk removal companies do not haul hazardous or toxic items. Check with your local junk removal service for the list of prohibited items. Also, junk removal companies do not remove items that are too heavy or are placed in hazardous areas. If there is a list of items that you want to dispose of, make sure that you choose a company that will safely dispose of the items.

The process of junk removal can be hazardous, but it’s important to follow regulations. It’s not safe to move large pieces of furniture yourself. Hiring a junk removal service can help avoid injury and liability issues. Junk removal companies will also provide you with the right equipment and training to handle the job safely. And don’t forget about the tax deduction! By choosing a company that specializes in junk removal, you’ll be helping the environment while saving money.

Before choosing a junk removal service, check their rates. The price for junk removal services varies significantly depending on the area you live in and the size of the junk removal truck. If you need a large truck, professionals will be able to provide you with an estimate. You can also ask the junk removal service to donate items if you have a donation or recycle them instead of taking them to the landfill. A reputable junk removal service will do its best to reduce waste and donate as much of its services as possible.

A popular junk removal service can help you clear clutter and empty estates. They operate franchises across states and provide free quotes and same-day pickups. Their prices are based on the amount of junk you’re trying to get rid of. Some even offer storage units and provide free estimates. If you’re moving, junk removal may be the right thing to do. You’ll have no need for a dumpster in the middle of nowhere when they can come and take care of it for you.

If you don’t have time to haul your own trash, the best option for getting rid of clutter is to hire a junk removal service. Junk removal companies can handle both large and small items and will haul your junk away for you. Many companies offer same-day or next-day pickup services. And because of the convenience of the services, they are a great option for any decluttering project. They can handle anything from bulky furniture to old electronics.

Some junk removal companies have two distinct ways of getting rid of your junk. You can either use a junk removal service that comes to your home with a big truck, or you can opt to hire a junk removal company that delivers the dumpster. You can also opt for a DIY option, which is often cheaper than hiring a junk removal service. However, you should consider how much time you have to spend, as some of them can take as long as a day to haul away all of your junk.

How to Choose Radiant Barrier Paint

Radiant Barrier Paint

There are many things to consider when selecting a radiant barrier paint. The paint’s coverage must be proper to achieve its goal of blocking radiant heat. Poorly applied glowing barrier paint can render the product useless. To avoid this, you should always hire a professional. Premium quality radiant barrier paint is more expensive but has a better return on investment. Look for a label and factory seal which confirm the product’s authenticity. Read this article to learn more about choosing a radiant barrier paint.

Before buying radiant barrier paint, make sure the surface is primed correctly and that the material is free of imperfections. The paint can be perforated or non-perforated. Perforated paint allows water vapor to escape, while non-perforated paint does not allow air to pass. The latter option can cause moisture buildup and mold outbreaks, especially in humid environments. Therefore, make sure to read the manufacturer’s instructions on how to apply radiant barrier paint.

Another radiant barrier paint is Hy-Tech Barrier Coat. This product contains a blend of pure metal pigment and Hy-Tech insulating ceramic microspheres. Aluminum is highly reflective to infrared due to its high concentration of mobile electrons. This coating contains aluminum flakes aligned parallel to the surface and has a reflectance value of 0.75 to 0.8. The reflective material can be applied to a new roof or an old one. Many of these paints are airless spray-on products.

Although some companies promote Radiant Barrier Paint as a high-quality, low-emittance paint, it is simply not a good product. The product does not reflect more than 75% of radiant heat. In addition to reflecting radiant energy, it does not emit less than 25%. While the paint may not be a great solution to the problem, it is the best way to protect your home from the harmful effects of hot or cold climates.

Radiant barrier paint is a popular choice for homes and businesses that suffer from high energy bills. It works as an insulating layer on exterior walls to block 99% of sun’s harmful ultraviolet rays. It reduces energy bills and insulates sound. In addition to its insulating qualities, radiant barrier paint can also reduce your home’s thermal load, which means you’ll spend less on energy bills and lower your utility bill.

In addition to being a great choice, radiant barrier paint is easy to install. It’s easier to apply than radiant barrier foil sheets and can give you a faster return on investment. Unlike foil sheets, it doesn’t require any special equipment, which can be a huge bonus. A Radiant Barrier Paint installation will give you peace of mind for years to come. This product is also known as Interior Radiation Control Coatings.

Besides providing protection against radiant heat, radiant barriers also improve the energy efficiency of buildings by reflecting the sun’s heat away from an air-conditioned space. These materials are an excellent supplement to conventional insulation, as they improve energy efficiency and decrease cooling costs. To install radiant barriers in your home, you can either use radiant barrier paint or an aluminum foil. However, if you aren’t certain of what type of radiant barrier you need, it’s best to consult with a professional first.

Another good way to understand radiant barrier paint is to view it on a YouTube video. The video demonstrates its application. It also explains how radiant barrier paint can help with your energy efficiency. The radiant barrier paint’s performance is measured against that of other insulation products. To see the benefits of radiant barrier paint, watch the video below. A commercial website shows the product in action. When installed correctly, radiant barrier paint can significantly improve the energy efficiency of a home.

Another important feature of radiant barrier paint is the woven fabric layer. The middle layer is composed of a thin metalized layer that is laminated to the top and bottom of the material. The outer surfaces of this radiant barrier have a proprietary anticorrosive coating. These coatings prevent the passage of moisture vapor, while maintaining the surface’s reflectivity. Xtreme’s reflective layer is tear-resistant. When purchasing a radiant barrier, make sure to compare it with the current ASTM C1313 tests.

As far as the efficiency of radiant barriers is concerned, they continue to be effective. Studies of radiant barrier paint show that it can reduce the amount of heat transfer and cooling load by up to 7%. A radiant barrier should be installed in an area facing the source of the heat. For best results, it should be placed facing down. However, the radiant barrier should be installed with a three-quarter-inch air space around it. The paint’s reflective properties help it avoid heat transfer by reflecting back the heat.

All About Basement Waterproofing

Basement Waterproofing is an important part of maintaining the integrity of your home. The process involves different techniques and materials to prevent moisture from seeping into your basement. For example, you may be required to install sump pumps or drains to prevent water from entering your home. A professional can perform this type of work for you. Here are some things to look out for in a basement waterproofing project. Again, these items should be included in your budget and done by a professional.

Home and Basement Repair

In addition to preventing the growth of mold and mildew in your basement, waterproofing also prevents the accumulation of water that could damage your home’s foundation. The process of waterproofing your basement requires several steps. First, determine the source of water. Since concrete is porous, you should check for wet streaks along cracks, the corners of windows, and the mortar joints around pipes. Once you’ve figured out the exact cause of water, you can choose an effective waterproofing solution.
When waterproofing your basement, you should follow a proper waterproofing process. There are two main types of waterproofing: EPDM rubber waterproofing membrane, a single-ply synthetic rubber. It’s a much better choice than alternatives. The cementitious coating is another type of waterproofing. It’s an acrylic-modified cement-based flexible membrane that resists positive and negative pressure for up to 100m.
A professional waterproofing company will help you choose the best product. The process will include digging up the outer perimeter of the basement to protect the foundation. Next, you’ll need to waterproof the walls. Finally, you’ll need to find the water source because concrete is porous. You’ll likely find wet streaks along cracks, around pipes, and at corners of windows. In addition to wet streaks, you’ll need to check for signs of moisture in the foundation before you choose a waterproofing solution.
There are many different methods to waterproof the basement. It can be a do-it-yourself project, or a foundation contractor can do it for you. The first step in waterproofing the walls is to find where the water source is located. If the walls are porous, they are susceptible to water and must be waterproofed. On the other hand, if they’re porous, water can seep through, which means they’re prone to leaks.
There are several different methods to waterproof the basement. Using a foundation contractor is an option if you don’t have the skills to do it yourself. Before beginning the project, you must first identify the water source. For example, if there’s a crack in the concrete, it is likely to be a leak. If you can’t figure out the source, you should call a foundation contractor. However, if you’re confident in your ability to waterproof the basement, you should consider hiring a professional.
When you’re planning to waterproof the walls of your basement, you need to consider the project’s cost. You can use DIY methods like laying down a layer of DRYLOK white extreme waterproofer on the walls. It’s recommended to let the paint dry before applying a second coat. After that, you can install a water-tight barrier. If you’re not confident in your abilities, you can call a professional.
Before waterproofing your basement, you need to consider how much space you have in the basement. First, you need to consider your home’s square footage to know what the project will cost. When comparing the costs, you need to keep in mind that the square footage should be doubled for every room in the house. Then you need to factor in the sloping floor and the number of walls. In the case of a small home, it’s best to hire a waterproofing company with a team experienced in these projects.
When it comes to waterproofing, there are several options. Most commonly, you’ll need to install a waterproofing membrane on the walls of your basement. This is an essential step for protecting your home. A leaky basement can lead to a dangerous situation. You don’t want to live in an area where you can’t breathe. It’s important to avoid situations where you need to use the basement to perform any work.

Choosing Quality Hardwood Floor Refinishing Services

There are several important factors to consider when choosing a quality wood floor refinishing service. The finish you choose will affect the durability of the hardwood, as well as its appearance. Hardwood Floor Refinishing service professionals will apply a clear coat of polyurethane to protect the flooring. This finish protects your wood from everyday wear and tear while making your floor look brand new. Polyurethane comes in two basic types, oil-based and water-based.

flooring

For a quality hardwood floor refinishing service, make sure you find someone who specializes in the process. The difference in a professional’s work is visible in the finish coat. If the floor has been refinished, it can be tricky for a novice to restore it, so a professional should do the job. To avoid problems, contact an experienced wood floor refinishing service. They will be able to apply a top coat to your floors.

To restore the beauty and durability of your floor, you should first hire a professional. The wood floor refinishing process requires a certain amount of time and expertise. While the process of restoring a hardwood floor is easy, it does require professional know-how to ensure that it will last. A good company will be able to provide the services you need to ensure the longevity of your floors. There are many things to consider when hiring a professional, and you should be sure to do your research before choosing a service.

Whether you need a new finish, it is important to hire the right team. Refinishing hardwood floors can be a very messy process. Thousands of tons of sawdust will be blown around during the process. If you have any asthma or allergies, you should choose a reputable company. It is important to remember that a professional wood floor refinishing service will protect your floor by using the correct products and equipment.

After the wood floor is repaired, it must be treated with a high-quality wood floor refinishing solution. Choosing a professional refinishing service is an excellent way to ensure the longevity of your hardwood floors. It can increase the value of your home. When selecting a professional, you should choose a company with experience restoring hardwood floors. It is essential to avoid refinishing if the flooring is prefinished.

It is important to find a company with the necessary skills and experience to restore your hardwood floors. Refinishing can be a very messy process. In addition, the sawdust produced during the process can be hazardous to your health and your house. Therefore, you should find a company that offers certified technicians expertise in exotic wood flooring refinishing. Moreover, it would be best if you considered the price of the wood floor refinishing you’ve chosen. You should never pay in full before the work has started.

Before hardwood floor refinishing, you should be sure to prepare your floor properly. First, it is important to remove shoe molding, also known as quarter-round. This molding can be easily removed using a molding bar. A large crowbar can damage the quarter-round and other components, so you should use a putty knife to remove it. It is also essential to make sure that the shoe molding is removed.

After refinishing, your floor is topped with a high-quality polyurethane finish. This long-lasting, waterproof finish is applied with a pad applicator or mop-like tool. The finished floor will dry within 24 hours. This protective layer will protect the hardwood from future wear and tear. In addition, it will make the floors shine. There are three main polyurethane finishes semi-gloss, satin, and gloss.

In addition to applying a clear coat of polyurethane to the hardwood floor, it is also important to find a professional who can handle prefinished wood floors. The finish coat of hardwood floors is an important part of the process and requires expertise. It should be applied by a professional who is experienced in refinishing wooden floors. This type of finishing is not a DIY project. You must contact a qualified company to get a free cost estimate and ensure that your floor is in good hands.

The Benefits of Hiring a Trash Removal Consultant

Trash removal consultants help businesses save money on disposal costs, ensure compliance with the Clean Water Act and EPA guidelines, and provide many other benefits. They also ensure that their services are professional, leaving no room for complaints. The following are some of the most important benefits of hiring a trash removal company. Read on for more information.

Junk Removal

Trash removal benefits the environment. While disposing of your own trash is possible, it can be dangerous and can expose you to toxins. Additionally, some states have regulations governing the disposal of certain types of waste. Junk removal professionals understand how to properly dispose of waste and can save you from fines and legal fees. When hiring a junk removal company, the process will be hassle-free and stress-free for you. The price of hiring a junk removal company will depend on the size and type of your home and your area. This service will also give you the extra space you need in your business.
Junk removal companies will take care of everything for you. They will haul away your junk, recycle it, and donate it to a local charity. They can also help you dispose of hazardous materials, such as paint and oil. Lastly, hiring a junk removal company will free up your time and reduce your stress level. In addition to freeing your time, hiring a junk removal company will help you save money on disposal and save you from the hassle of sorting your own junk.
Junk removal companies are environmentally friendly. They know where to take your trash and recycle it properly. Moreover, you can also avoid the hassle of sorting your own junk, which may lead to costly fines and legal issues. A junk removal service will be happy to help you with all these issues. They are also happy to answer your questions. You will be happy you hired a junk removal service. They can help you organize your space, which makes it easier to clear out your space.
You can save money. Many junk removal companies offer free quotes, and you can compare prices and find the best deal. This will save you time, money, and energy. In addition to getting a cheaper quote, you can also negotiate the price of the service. However, it is important to remember that the rates charged by junk removal services will vary based on the kind of waste you want to dispose of. If you have more than a lot of junk, you can bargain for a lower price.
There are several benefits to hiring a junk removal service. You will not have to worry about handling hazardous materials. Instead, the junk removal experts will dispose of them safely and responsibly. If you have too much junk, you can contact a junk removal company and arrange a pickup date. Once you have hired a junk removal service, you will be able to enjoy these benefits. It will save you time and money, and you will be able to spend more time doing other things.
You will also be able to get rid of toxic materials. If you are a homeowner or renter, it is important to know where you can dispose of hazardous materials safely. If you are renting, you can ask your junk removal company for recycling tips. They will then dispose of hazardous waste for you. A junk removal company will also keep your garbage safe from the environment. They will also avoid landfill fees and save you money. They will also be more environmentally friendly.
Trash removal companies also follow environmental regulations. They will dispose of toxic materials and other harmful products with care. They will also make sure to recycle what you can. Ultimately, this means you will be saving money on the garbage disposal. The service will help you save time and energy. You will not have to worry about your junk being picked up. Rather, they will be able to get rid of all the hazardous materials safely. There are plenty of other benefits to hiring a junk removal company.

Commercial Window Cleaning Services

window cleaning

There are a variety of factors involved when considering the best Orange County Window Cleaning services. Cleaning the windows involves more than just wiping down the glass and making sure there are no streaks. These days, you need more than just that to have an effective cleaning. Find out what is necessary to keep your windows in pristine condition throughout the year.

While both of those aspects are extremely important from a cleanliness standpoint, other factors must be considered. At the very least, every homeowner needs at least five different types of window cleaning services to make sure an overall all-over clean. That includes window rinsing, window washing, spot removal, glass polishing, window buffing and window waxing. If a family owned business, a condominium unit or an apartment does not provide those services, it is time to consider moving to a residence which offers them.

The first thing to consider is how often you have windows open. If you simply leave your windows cracked open, then professional window cleaning services are necessary more than if you let them roll up and down on occasion. Even weekly or bi-weekly cleaning may be necessary to prevent staining on the surfaces of the windows. Professional cleaners often use squeegees and abrasive materials in order to get rid of dirt and grime. This is an important step as windows tend to have a high degree of surface area which means that any dirt or grime can be easily worked into the glass.

After getting a list of all the services needed for your windows, it is time to move on to something that directly affects the windows themselves. If you do not have clean windows, then your next step should be to provide water purification for the home. Every house has rainwater running off of its roof and into the home. Over time, this rain water can damage the surfaces of the windows by forming a film. Without cleaning or water purification, this film can form a layer which over time will damage the windows.

When considering whether or not you need professional window cleaning services for your home, it is important to consider the possibility of cleaning or replacing the glass in your home. Windows are typically made from glass which is extremely fragile. One way to reduce the chances of glass breakage is to make sure that the exterior of the windows are kept as clean as possible. Using a squeegee to wipe away dust and dirt is an excellent first step. The next step is to check the exterior of your windows for any areas which could become weak due to grime or dirt. Professional cleaners will often use commercial window cleaning services to clean these areas before they are replaced.

Many people simply do not realize that it is important to clean the siding of a house. In many cases, the siding will be made out of metal, and if it is not kept clean, it can get damaged. If you hire window cleaning services, they will get the siding freshly washed so that it will look great. This will save you money because you no longer have to buy metal cleaning products to keep it clean. In addition, your exterior walls will be protected against staining or damage due to rain and wind. Finally, you will get your home’s exterior looking great.

If you live in an older house, or if you simply want to get the inside of your home cleaned, you may be able to do this yourself. In fact, there are many people who feel that they can clean their own windows. However, if you are unsure about how to clean the glass alone, you may find it useful to call on one of your local window cleaning specialists. They will know how to remove the impurities that you may have missed when scrubbing the windows yourself. In addition, they will be able to advise you about the best way to clean the other parts of the house as well, such as your floors.

The exterior of your home is exposed every day, and unless you keep it very clean, it can attract all sorts of unsightly grime. If you have neglected the exterior windows over time, you should take care of this problem today. There are many commercial window cleaning services available, so you can call on a company representative to come out and clean your windows. You will soon get a shining home with clean windows.